zynq-uboo 0 Device: zynq_sdhci Manufacturer ID: 74 OEM: 4a45 Name: ASTCTran Speed: 50000000 Rd Block Len: 512 SD version 3.0 High Capacity: Yes Capacity: 7.4 GiB Bus Width: 4-bit reading uEnv.txt ** Unable to read file uEnv.txt ** Copying Linux from SD to RAM... reading uImage 3448376 bytes read in 308 ms (10.7 MiB/s) reading devicetree.dtb 7442 bytes read in 18 ms (403.3 KiB/s) reading uramdisk.image.gz 3694172 bytes read in 333 ms (10.6 MiB/s) ## Booting kernel from Legacy Image at 03000000 ... Image Name: Linux-3.18.0-xilinx-46110-gd627f Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3448312 Bytes = 3.3 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 02000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 3694108 Bytes = 3.5 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 02a00000 Booting using the fdt blob at 0x2a00000 Loading Kernel Image ... OK Loading Ramdisk to 1f7a9000, end 1fb2ee1c ... OK Loading Device Tree to 1f7a4000, end 1f7a8d11 ... OK Starting kernel ... Booting Linux on physical CPU 0x0 Linux version 3.18.0-xilinx-46110-gd627f5d (shohei@ubuntu) (gcc version 4.9.2 (Sourcery CodeBench Lite 2015.05-17) ) #1 SMP PREEMPT Mon Apr 10 17:39:58 JST 2017 CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine model: Xilinx Zynq cma: Reserved 16 MiB at 0x1e400000 Memory policy: Data cache writealloc PERCPU: Embedded 10 pages/cpu @5fbd3000 s8768 r8192 d24000 u40960 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048 Kernel command line: console=ttyPS0,115200 root=/dev/ram rw earlyprintk PID hash table entries: 2048 (order: 1, 8192 bytes) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 492632K/524288K available (4646K kernel code, 258K rwdata, 1616K rodata, 216K init, 219K bss, 31656K reserved, 0K highmem) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xffe00000 (2048 kB) vmalloc : 0x60800000 - 0xff000000 (2536 MB) lowmem : 0x40000000 - 0x60000000 ( 512 MB) pkmap : 0x3fe00000 - 0x40000000 ( 2 MB) modules : 0x3f000000 - 0x3fe00000 ( 14 MB) .text : 0x40008000 - 0x40625b04 (6263 kB) .init : 0x40626000 - 0x4065c000 ( 216 kB) .data : 0x4065c000 - 0x4069cb60 ( 259 kB) .bss : 0x4069cb60 - 0x406d3a78 ( 220 kB) Preemptible hierarchical RCU implementation. Dump stacks of tasks blocking RCU-preempt GP. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS:16 nr_irqs:16 16 L2C-310 erratum 769419 enabled L2C-310 enabling early BRESP for Cortex-A9 L2C-310 full line of zeros enabled for Cortex-A9 L2C-310 ID prefetch enabled, offset 1 lines L2C-310 dynamic clock gating enabled, standby mode enabled L2C-310 cache controller enabled, 8 ways, 512 kB L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76360001 ps7-slcr mapped to 60804000 zynq_clock_init: clkc starts at 60804100 Zynq clock init sched_clock: 64 bits at 325MHz, resolution 3ns, wraps every 3383112499200ns ps7-ttc #0 at 60806000, irq=43 Console: colour dummy device 80x30 Calibrating delay loop... 1292.69 BogoMIPS (lpj=6463488) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x466698 - 0x4666f0 CPU1: Booted secondary processor CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Brought up 2 CPUs SMP: Total of 2 processors activated. CPU: All CPU(s) started in SVC mode. devtmpfs: initialized VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 regulator-dummy: no parameters NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations cpuidle: using governor ladder cpuidle: using governor menu hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. hw-breakpoint: maximum watchpoint size is 4 bytes. zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0x60880000 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb media: Linux media interface: v0.10 Linux video capture interface: v2.00 pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> PTP clock support registered EDAC MC: Ver: 3.0.0 Advanced Linux Sound Architecture Driver Initialized. Switched to clocksource arm_global_timer NET: Registered protocol family 2 TCP established hash table entries: 4096 (order: 2, 16384 bytes) TCP bind hash table entries: 4096 (order: 3, 32768 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP: reno registered UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Trying to unpack rootfs image as initramfs... rootfs image is not initramfs (no cpio magic); looks like an initrd Freeing initrd memory: 3608K (5f7a9000 - 5fb2f000) hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available futex hash table entries: 512 (order: 3, 32768 bytes) jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. msgmni has been set to 1001 io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330 dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16 xuartps e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3125000) is a xuartps console [ttyPS0] enabled xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to 6086c000 [drm] Initialized drm 1.1.0 20060810 brd: module loaded loop: module loaded CAN device driver interface e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k e1000e: Copyright(c) 1999 - 2014 Intel Corporation. libphy: XEMACPS mii bus: probed xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ULPI transceiver vendor/product ID 0x0424/0x0007 Found SMSC USB3320 ULPI transceiver. ULPI integrity check: passed. zynq-ehci zynq-ehci.0: Xilinx Zynq USB EHCI Host Controller zynq-ehci zynq-ehci.0: new USB bus registered, assigned bus number 1 zynq-ehci zynq-ehci.0: irq 53, io mem 0x00000000 zynq-ehci zynq-ehci.0: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice i2c /dev entries driver Xilinx Zynq CpuIdle Driver started sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper sdhci-arasan e0100000.ps7-sdio: No vmmc regulator found sdhci-arasan e0100000.ps7-sdio: No vqmmc regulator found mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver TCP: cubic registered NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05' zynq_pm_late_init: Unable to map DDRC IO memory. Registering SWP/SWPB emulation handler drivers/rtc/hctosys.c: unable to open rtc device (rtc0) ALSA device list: No soundcards found. mmc0: new high speed SDHC card at address 0001 mmcblk0: mmc0:0001 ASTC 7.43 GiB mmcblk0: p1 p2 RAMDISK: gzip image found at block 0 EXT2-fs (ram0): warning: mounting unchecked fs, running e2fsck is recommended VFS: Mounted root (ext2 filesystem) on device 1:0. devtmpfs: mounted Freeing unused kernel memory: 216K (40626000 - 4065c000) Starting rcS... ++ Mounting filesystem ++ Setting up mdev ++ Configure static IP 192.168.1.10 ++ Starting telnet daemon ++ Starting http daemon ++ Starting ftp daemon ++ Starting dropbear (ssh) daemon random: dropbear urandom read with 1 bits of entropy available ++ Starting OLED Display insmod: can't read '/lib/modules/3.18.0-xilinx-46110-gd627f5d/pmodoled-gpio.ko': No such file or directory ++ Exporting LEDs & SWs /etc/init.d/rcS: line 46: can't create /sys/class/gpio/gpio61/direction: nonexistent directory /etc/init.d/rcS: line 46: can't create /sys/class/gpio/gpio62/direction: nonexistent directory /etc/init.d/rcS: line 46: can't create /sys/class/gpio/gpio63/direction: nonexistent directory /etc/init.d/rcS: line 46: can't create /sys/class/gpio/gpio64/direction: nonexistent directory /etc/init.d/rcS: line 46: can't create /sys/class/gpio/gpio65/direction: nonexistent directory /etc/init.d/rcS: line 46: can't create /sys/class/gpio/gpio66/direction: nonexistent directory /etc/init.d/rcS: line 46: can't create /sys/class/gpio/gpio67/direction: nonexistent directory /etc/init.d/rcS: line 46: can't create /sys/class/gpio/gpio68/direction: nonexistent directory rcS Complete zynq> xemacps e000b000.ps7-ethernet: Set clk to 25000000 Hz xemacps e000b000.ps7-ethernet: link up (100/FULL)