D-Link DSL-2730Uにtelnetで入る

以下のコマンドを実行してみた
TBSというブートローダを使っているらしい。RedbootかuBootだったらよかったのだが。

 Command Word
 ----------------------------------------------------------------------------
  cm                [1] Command of mode convert
 ----------------------------------------------------------------------------
  acl               acl: <conname(s)> <contype(s)> <port(s)> <optname(s)>
  adsl              Display the table SNR or Bits per tones(carriers) of the...
  cls               Clear screen 
  cpuinfo           CPU usage
  ddns              Show or config the ddns module
  debug             Get or Set a Node,only for debug
  device            display the brand and model of processor, ADSL, RAM memo...
  dhcpserver        Show or config or enable or disable the DHCPServer
  dmz               Show or configure the DMZ
  exit              Logout from the system 
  firmware          download image via network using TFTP,FTP or HTTP server...
  help              Help information of command line operate
  ifconfig          Show or configure the WAN interface
  ipt               Show or configure the IPT module
  lan               Show or config or enabl or|disable the lan IPInterface
  mac               Show or config or enable or filter mac black list
  meminfo           Memory usage
  modem             display the brand,model,firmware version,firmware date     
  natp              Show or config the natp(Port Forwarding) module            
  password          config the username and the password                       
  pmirror           pmirror vpi [vpival] vci[vcival] flags<pmirror_flags>      
  reboot            reboot                                                     
  restore_defaults  load default factory config                                
  route             Show or config the route module including dynamic route ...
  save              save config                                                
  save_and_exit     save config and exit                                       
  save_and_reboot   save and reboot                                            
  set               [1] Operation of system attribute set                      
  sh                go to shell platform                                       
  tr069             config or show or set connection request the Tr069 list    
  wan               Show or config the wan connection                          
  wlan              Show or config or enable or disable the wlan and the wla...
  wmac              Show or config or enable or filter wireless mac list       
 ----------------------------------------------------------------------------  
 
 
TBS>>modem showall
Modem brand:      D-Link
Modem model:      DSL-2730U
Firmware version: ME_1.07
Firmware date:    Fri, 19 Jul 2013 18:33:21

TBS>>adsl bits
------the table Bits per tones(carriers) of the interface ADSL2+-----

     Downstream       Upstream
              0              0

TBS>>cpuinfo
CPU usage: 33%

TBS>>device showall
                brand           model
Processor       REALTEK         RTL8672-VE-GR
ADSL            REALTEK         RTL8271B-VR-GR
RAM memory      Hynix           HY5DU561622ETP-5
Flash memory    MXIC            MX25L6445EM2I-10G

TBS>>meminfo
Memory usage: 70%
 
TBS>>route show
Dynamic Route:
  Interface             RIP version

  Execute command failed.